How It Works: Self-Coiling Cord
The RoboReel’s 12-gauge power cord contains four wires, only three of which transmit current. The fourth runs between the circuit board and a button on the outlet head, which the user presses to initiate retraction.
Once the circuit board receives the signal, it starts the motor, which revs at 4,500 rpms. A combo gear transfers the motion to the 8.8-inch-diameter spool, rotating it at about five feet per second.
Opposite the motor, a worm and helical gear move a cam arm in an elliptical pattern. The cam swings the spool from side to side on rotors. That ensures that the cord winds in the same pattern every time it retracts.
4) Slow and Finish
To keep track of how much cord the spool has reeled in, an encoder counts the number of times a magnet on one side of the spool passes it. For the last two feet, the spool slows to about two feet per second, which prevents snapback.
The circuit board also contains a pair of thermostats. When the internal temperature surpasses 122 degrees, an internal fan cools the wound portion of the cord. If the temperature exceeds 176 degrees, which could cause the system to catch fire, the circuit board cuts the power.
Copper Wire: 3.24 pounds
Power Supplied: 15 amps
Cord Length: 50 feet
Retraction Speed: 3.4 mph
Check out the original source here.